Session Border Controllers
41
Mediant 4000B SBC
Hardware Installation Manual
5. Cabling the Device
5.2
Connecting the Serial Interface to a Computer
The RS-232 interface port is used to access the command line interface (CLI) for serial
communication. The DB-9 to micro USB cable adapter is provided for this purpose:
Figure 5-5: Serial Interface Cable Adapter and Connector Pinouts
To connect the serial interface port to a computer:
1.
Connect the Micro-USB connector (labeled "
P3
" in the figure above), at one end of the
cable, to the serial port (labeled
IOIO
) located on the SBC module.
Figure 5-6: Connecting the Serial Interface
2.
Connect the DB-9 connector labeled "
P1
" (red), at the other end of the cable, to the
RS-232 communication port on your computer.
Notes:
•
The RS-232 port is not intended for permanent connection.
•
The DB-9 connector labeled "P2" is used only for debugging.
Summary of Contents for Mediant 4000B SBC
Page 2: ......
