CLI Reference Guide
144
Document #: LTRT-17940
System and VoIP Functionalities
5.23 Configuring Media Security Settings
The following defines how to configure Media Security settings.
5.23.1 media security
This command sets the Media Security parameters.
Syntax:
media security
set
<parameter> <value>
The command’s syntax format is described below:
Arguments
Description
<parameter> <value>
Sets the following table parameters:
ARIA-protocol-support
RTCP-encryption-disable-tx
RTP-authentication-disable-tx
RTP-encryption-disable-tx
SRTP-tx-packet-MKI-size
defaults
inbound-media-latch-mode
media-sec-bhvior
media-security-enable
offer-srtp-cipher
symmetric-mki
For a description of these parameters, refer to the
User's Manual
.
Defaults
NA
Command Modes
Enable
Examples:
The following example determines the way of handling incoming media packets
from a non-expected address/port.
(config-voip)#
media security
(media-security)#
set inbound-media-latch-mode
dynamic
Summary of Contents for Mediant 1000 MSBG
Page 2: ......
Page 8: ...CLI Reference Guide 8 Document LTRT 17940 System and VoIP Functionalities Reader s Notes ...
Page 12: ...CLI Reference Guide 12 Document LTRT 17940 System and VoIP Functionalities Reader s Notes ...
Page 159: ...CLI Reference Guide 6 Show Commands Version 6 4 159 January 2012 Reader s Notes ...