AudioCodes Mediant 1000 MSBG Cli Reference Manual Download Page 26

Page: 26 / 160

CLI Reference Guide

Document #: LTRT-17940

System and VoIP Functionalities

3.7

Debug Commands

3.7.1

debug log

This command displays debugging messages to the CLI session.

Syntax:

The syntax of this command can include the following variations:

debug log

no debug log

no debug log all

Defaults:

Notes:

1. Activating the debug log facility will redirect the device error messages (e.g. Syslog

messages) to the CLI console as well as their original destination.

2. A ‘no’ command is supported for this command (

no debug log

), which disables the

logging facility.

3. When working via telnet/SSH, "debug log" affects only the current CLI session.
4. To cancel log display to

all

CLI sessions, use "

no debug log all

Command Modes:

Enable

Related Commands:

Examples:

The following example upgrades and activates the logging facility redirection.

debug log

Summary of Contents for Mediant 1000 MSBG

































































































































































Search results

Summary of Contents for Mediant 1000 MSBG

Reviews:

Related manuals for Mediant 1000 MSBG

Brands by name

Popular brands

AudioCodes Mediant 1000 MSBG, Cli Reference Manual

Search results

Summary of Contents for Mediant 1000 MSBG

Reviews:

Related manuals for Mediant 1000 MSBG

Brands by name

Popular brands