AudioCodes Mediant 1000 MSBG, Cli Reference Manual

Page: 113 / 160

CLI Reference Guide 5. VoIP Commands
Version 6.4 113 January 2012
5.16.2.2 fxo-setting
This command defines the fxo settings.
Syntax:
# gw analoggw fxo-setting
# set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:

answer-supervision

defaults

dialing-mode

disc-on-bsy-tone-c

disc-on-dial-tone

fxo-autodial-play-bsytn

fxo-dbl-ans

guard-time-btwn-calls

reorder-tone-duration

ring-detection-tout

rings-b4-det-callerid

snd-mtr-msg-2ip

time-wait-b4-dialing

waiting-4-dial-tone
For a description of these parameters, refer to the User's Manual .
Defaults
NA
Command Modes
Enable
Examples:
The following example enables the wait for dial tone before initiating an outgoing call to the
PBX/PSTN (FXO one-stage dialing mode).
(config-voip)# gw analoggw fxo-setting
(gw-analogGW-fxo)# set waiting-4-dial-tone enable