AudioCodes Mediant 1000 MSBG Cli Reference Manual Download Page 24

Page: 24 / 160

CLI Reference Guide

Document #: LTRT-17940

System and VoIP Functionalities

3.5

copy cli-script

This command copies a

cli-script

file from a URL source to the device.

Syntax:

The syntax of this command can include the following variations:

copy cli-script from

<URL>

The command syntax format is described below:

Arguments

Description

<URL>

When copying

from

a URL, the file source URL is tftp only.

from

Copy the cli-script file from URL file source.

Defaults:

Notes:

1. This command loads a show-run output file into the board (via

TFTP only

) and applies

it.

2. The script is activated immediately. The user does not need to do any additional action

besides loading it.

Command Modes:

Enable

Related Commands:

copy cli-script

Examples:

The following example copies the date configuration from tftp server.

copy cli-script from

tftp://192.168.0.3/script1.txt

Summary of Contents for Mediant 1000 MSBG

































































































































































Search results

Summary of Contents for Mediant 1000 MSBG

Reviews:

Related manuals for Mediant 1000 MSBG

Brands by name

Popular brands

AudioCodes Mediant 1000 MSBG, Cli Reference Manual

Search results

Summary of Contents for Mediant 1000 MSBG

Reviews:

Related manuals for Mediant 1000 MSBG

Brands by name

Popular brands