CLI Reference Guide
5. VoIP Commands
Version 6.4
141
January 2012
5.20 Configuring IPM-Detectors Settings
The following defines how to configure IPM-Detectors settings.
5.20.1 media IPM-detectors
This command configures the IP Media detectors configuration.
Syntax:
media IPM-detectors
set
<parameter> <value>
The command’s syntax format is described below:
Arguments
Description
<parameter> <value>
Sets the following table parameters:
IPM-detectors-enable
answer-detector-activativity-delay
answer-detector-enable
answer-detector-redirection
answer-detector-sensitivity
answer-detector-silence-time
defaults
energy-detector-enable
energy-detector-redirection
energy-detector-sensitivity
energy-detector-threshold
For a description of these parameters, refer to the
User's Manual
.
Defaults
NA
Command Modes
Enable
Examples:
The following example enables the DSP IP Media Detectors.
(config-voip)#
media IPM-detectors
(media-IPM-detectors)#
set IPM-detectors-enable
enable
Summary of Contents for Mediant 1000 MSBG
Page 2: ......
Page 8: ...CLI Reference Guide 8 Document LTRT 17940 System and VoIP Functionalities Reader s Notes ...
Page 12: ...CLI Reference Guide 12 Document LTRT 17940 System and VoIP Functionalities Reader s Notes ...
Page 159: ...CLI Reference Guide 6 Show Commands Version 6 4 159 January 2012 Reader s Notes ...