9
The rear bumper comprises a total of 4 parts:
the bumper panel, the rear cover, the alumi-
nium cross-member and the central locating
element.
The guide profiles attached to the left and
right wings ensure an even gap all round.
A zero joint is created by attaching the bum-
per to the wing by means of threaded bolts as
well as nut and washer combinations.
The rear cover is available in two versions
depending on engine variant (TT has one
tailpipe, the TTS two). A seamless transition to
the body side section (zero joint) is produced
by means of 2 bolts on each body side section.
Body
The front bumper comprises two parts: the
cover panel and a decorative grille. The bum-
per carrier is made of aluminium and bolted to
the side members by impact absorbing ele-
ments.
SSP207/74
SSP207/75
Special features
Front bumper
Rear bumper
