11
Taillights
To replace the filament lamps, the complete
taillight unit is removed without needing any
tools. Flaps are attached to the luggage com-
partment linings on the left and right. The
light cluster is secured on the inside by means
of 2 captive knurled bolts. On the outside, the
taillight is engaged in a ball head.
Doors
Fuel filler flap
The door component carrier is made of alumi-
nium and can be adjusted for length, height
and inclination.
Additional side protection pads protect the
pelvis area.
The fuel filler flap is made of aluminium. It can
only be opened electrically via a switch in the
central console.
The fuel filler flap is attached from the exterior
with three anti-theft-protected bolts plus four
decorative bolts.
If the electrical system fails, the fuel filler flap
can be opened via an emergency release
mechanism in the luggage compartment. For
this purpose, it is necessary to open the flap in
the side trim panel on the right-hand side of
the luggage compartment and pull the cable
in the direction indicated on sticker.
SSP207/56
The light cluster can be adjusted along
the vehicle’s longitudinal axis by
means of the threaded sleeves.
SSP207/47
The doors of the Audi TT Coupé are frameless
and of two-piece construction.
The door panel is made of steel with a bolted
high-strength side reinforcement integrated in
the door.
SSP207/72
