
Get
ting R
ead
y
5
Slowly remove the microSD memory card
Slowly pull the microSD memory card straight out.
Some microSD memory cards cannot be unlocked and
do not come out smoothly. In such case, pull it out with
your finger.
6
Close the card slot cover (
▶
P. 28)
◎
Do not touch the terminal part of microSD memory card.
◎
Do not remove the microSD memory card forcefully. It may
result in damage to the microSD memory card or the data
loss.
◎
The microSD memory card may be warm after a long time
use. It is normal.
◎
Before removing the microSD memory card, be sure to
unmount it to prevent data from loss (deletion).
Charging
When you purchase your product, the battery pack is not
fully charged. Make sure to charge the battery pack before
use. When the charging light in red turns off, charging is
complete.
◎
The product may become warm while charging, depending
on the situation, but this is not abnormal.
◎
Charging while using camera etc. may take longer.
◎
When you operate the product with the specified charger
(sold separately) connected, the product may repeat
short-time charging/discharging resulting in short battery
life.
◎
Charging may stop if the surrounding temperature or the
temperature of the product is extremely high or low. Charge
as much as possible in normal temperature conditions.
◎
If the charging light blinks in red, check if connections, etc.
are correct. If the light keeps blinking, stop charging and
then contact an au shop or Repair and Delivery Service
Center.
◎
The charging light may not immediately go out even after
" " appears during charging, but it will go out shortly to
complete charging.
◎
Do not allow conductive foreign objects (metal fragments,
pencil leads, etc.) to come into contact with or get inside
the connection terminals.
48