
Saf
ety P
recautions
Precautions before use
•
Close the card slot cover firmly. Water resistance is only
effective when the cover is securely closed.
•
Never open/close the card slot cover while hands or the
product are wet. Do not connect an earphone with any
water in the earphone microphone terminal.
•
Do not submerse in or splash with liquid other than tap
water (seawater, pool water, hot spring water, soap,
detergent, water with bath salt, alcohol, beverage, salad
dressing, etc.). Do not use where exposed to pet urine.
If splashed, immediately rinse with tap water.
•
Do not place directly on a sandy beach, etc. Doing so
might allow sand, etc. to enter the receiver, microphone,
speaker, earphone microphone terminal, external
connection terminal, etc., causing sound to be less
audible, or allow sand, etc. to get in product and cause
overheating or malfunction.
•
Do not use the product underwater.
•
Do not leave for a long period in a bath room, near a sink,
or in high humidity.
•
Even after the water is drained, the inner parts might be
still wet. Although you can use the product, do not place it
near things that must not get wet. Take care not to wet
your clothes, bag or contents of the bag.
•
If water enters the receiver, microphone, speaker, etc. and
sound is temporarily less audible, drain water.
•
Avoid spraying the product with high-pressure water, as
the product is not designed to withstand high water
pressure.
•
Do not wash the product in a washing machine or
ultrasound bath.
•
Do not submerse in a bathtub. Product is not designed to
withstand heat.
•
Extreme changes in temperature cause condensation.
Wait until the product reaches room temperature before
you bring the product from a cold place into a warm
bathroom.
•
Product does not float.
●
Card slot cover
Ensure the card slot cover is closed firmly. Even a minute
particle (a single hair, etc.) becoming lodged between the
contact surfaces can cause seepage.
Do not open/close the card slot cover with gloves on. Even
a minute particle (a single hair, etc.) becoming lodged
between the contact surfaces can cause seepage. If
closing the cover and there are any water droplets, soiling,
etc. present, wipe with a dry, clean cloth.
The card slot cover cannot maintain water resistance if
deteriorated or damaged.
27