Saf
ety P
recautions
●
Take care not to place magnetized items such as
magnetic cards, speakers and TV sets near the product,
as it might cause malfunction.
Putting a strong magnetism close to the product might
cause false operation.
●
Do not bring near a cash card/credit card/prepaid card/
or other magnetic card. Doing so might cause loss of
recorded information.
●
When you put the product in your pocket or bag, take
care so that the display does not come in contact with
metal objects or other hard objects. Doing so might
cause scratching or damage. Also, be careful not to
scratch or damage the display by using a strap whose
metal or other hard part comes in contact with the
display.
●
When suddenly brought into a warm place from a cold
place, or when in a humid location, or when used where
temperature suddenly changes (e.g. near the air
discharge port of an air conditioner), water droplets (i.e.
condensation) sometimes are formed inside the product.
Note that when used under conditions such as this, the
humidity might cause corrosion or a fault.
●
Condensation may form on the camera lens and inside
of the display due to the temperature, humidity, etc.
where used. This is not a malfunction or trouble with the
product.
●
Where condensation is likely to form on the camera lens
and inside of the display
Condensation may form on the lens and inside of the
display where temperature changes are large or where
humidity is high such as below.
•
Bringing the product into a warm location such as
indoors from a cold one
●
Do not exert excessive force when attaching/removing a
microSD memory card. Doing so might injure your hands
or fingers.
●
While writing/reading data to/from a microSD memory
card, do not subject the product to vibration or impact or
turn off the power. Doing so might cause loss of data or
malfunction.
●
Note that covering the light sensor with your finger or
putting a sticker, etc. on it may hinder it from detecting
the ambient light level and functioning correctly.
●
Do not put a sticker, etc. on the proximity sensor. Doing
so may cause the sensor to malfunction and make the
display always turned off while receiving a call or during
a call.
●
The card slot cover should normally be closed. Using the
product with the cover open might allow dust, water, etc.
to enter and cause malfunction.
●
Do not allow liquid or foreign objects such as metal to
enter the au IC Card slot or microSD memory card slot.
Doing so might cause malfunction.
●
Do not subject product to excessive impact such as by
dropping it, throwing it, or stepping on it. Doing so might
cause malfunction.
23