User manual
– SYSTOE
14 168
Rev. G
Page 16/38
8.6
START: start the measurement
From the acquisition screen, press on START to start an examination.
If current mode is AUTO (regular toe), cuffs are automatically inflated
once the user has pressed on START.
If current mode is SEMI-AUTO (short toe), the user needs to press
on the sensor to start the examination. The pressure on the sensor
should be kept as long as the message
“Keep press until bip” is
displayed (see hereafter description table with illustrations). The user
needs to
press rather hard to get a proper emptying of the toe pulp.
Toe length
REGULAR TOE
SHORT TOE
Examination
mode
AUTO (see §8.3)
SEMI-AUTO (see §8.4.2
Occlusion cuff
positioning
YES
YES
Sensor cuff
positioning
YES
NO
(Remove the cuff)
Sensor
positioning
YES, with double-sided tape
YES, with double-sided tape
Before START
Before START
Whatever the mode (AUTO or SEMI-AUTO), the display of
the
SysToe
looks like one of these two displays.
