User manual
– SYSTOE
14 168
Rev. G
Page 12/38
7
Management of the battery
Replace the battery pack annually or when its capacity is noticeably
diminished.
The battery has been designed for a certain number of charge/discharge
cycles.
The battery must be charged only when a specific message is displayed.
Hereafter is an example of this kind of messages.
When the
SysToe
is switched off or on, a message is displayed in order to
let you know if you have to connect the charger or not.
If the battery is low and if you have to do a measurement you can work
with the
SysToe
connected to the charger.
Once the
SysToe
is connected to the charger, it must remain connected to
the charger for 5 hours in order to charge fully the battery.
To charge the battery, plug the charger to the charger connector on the
side of the
SysToe
.
The yellow CHARGING indicator flashes during charging.
The
SysToe
uses a Nickel Medal Hydride (NiMH) battery pack. The
system charges a fully depleted battery in 5 hours.
Do not always use the SysToe connected to the charger.
