User manual
– SYSTOE
14 168
Rev. G
Page 26/38
11
Examination export via USB
Connection between the
SysToe
and the PC-Windows is allowed in order
to down load the measurements stored into the
SysToe
to a PC.
The software delivered with the
SysToe
must be installed on the PC.
When connecting the USB cable, the
SysToe
directly goes to this menu.
1: Export current examination to the PC
2: Export all examinations to the PC
MODE: Go to export mode configuration
RET.:
Go to main menu
If the user select adjust Time/Date on
SysToe
from the PC, the following screen
is displayed.
MODE: Go to export mode configuration
RET.:
Go to main menu
If the user select “erase all exams” on the
PC, a message is displayed on the
SysToe
to allow the user to validate or not the
complete deletion.
YES: Erase all exams
NO:
Do NOT erase all exams
12
Powering off the device
The
SysToe
be switched from any screen.
To switch off the
SysToe
, press the power ON/OFF key for a few seconds
until the power off menu is displayed.
YES: To confirm the switch off
NO:
To cancel the switch off
Here, it is advised not to plug the
SysToe
to the charger.
