ATS 2140-M Series, Instruction Manual

Page: 62 / 115

62
20. Creep Data Logging Rates allow the system to collect data at a faster rate upon initial loading
and then slow down during creep action testing. The default values follow normal ASTM testing
and typically are not changed.
21. Click Next to move to the Step Loads screen. This screen is used for stress rupture testing. If
performing a creep test, skip this screen by clicking Next. See step 23.
22. If performing a stress rupture test that requires step loading, specify the time for initial step load,
step load value, and step load period.
23. Click Next to proceed to the Cyclic screen. This feature is not currently used on most ATS testers.
Contact ATS if cyclic loading is desired.