ATS 2140-M Series, Instruction Manual

Page: 101 / 115

101
8.2.5.3 Reports
Both calibration and verification reports are archived with the data for all completed tests.
Both Calibration and Verification report windows are a list of information on a plain screen.
It is possible to view these reports for frames on which tests are currently running by selecting Running
Test from the View menu. When the screen appears, select the desired frame.
Another method for viewing the calibration reports is by accessing the Frame Services menu. Double-
click on the status display line of the appropriate frame. Select View Data from the Frame Services menu,
select the Extensometer Calibration from the Report/Graph menu that appears and click OK.
8.2.5.4 Viewing Calibration Summary
A review of the calibration status of a frame can be acquired by double-clicking with the left mouse on
the status line of the frame while holding down the Control (Ctrl) key. This can be done regardless of the
state of the frame.
A report screen is generated after the frame calibration. This type of calibration is normally done once a
year with the proper equipment. For more information on how to calibrate a frame, please contact the
ATS Service Department at +1-724-283-1212.
Please note that for the initial test, the frame is pre-calibrated at the ATS factory. To keep it current, the
frame should be recalibrated one year later.