ATS 2140-M Series, Instruction Manual

Page: 108 / 115

108
Specimen Reached Creep Limit: The test is being shut down because the creep limit specified in the test
specification has been reached.
Specimen Reached Life Hours: The test is being shut down because the run time limit specified in the
test specification has been reached.
Specimen Reached Reference Plain or Life Hours: The notch specimen has reached the reference plain’s
hours and the test will be shut down.
Specimen Ruptured: The system has detected a specimen rupture.
Step Load Completed by User Name: Indicates the user that completed the manual step load.
Temperature Measurement Error, Shutdown: A fatal hardware error has occurred in the temperature
measurement subsystem of the frame controller.
Test Reloaded or Restarted: Indicates that a test which had been previously removed and post tested
has been restarted.
Test Restarted Automatically by System:
The test has been automatically restarted after a controller
power failure.
Test Restarted Manually: The test was restarted by a user after it had shut down.
Test Terminated by User Name: Indicates which user terminated the test.
(Top, Middle, or Bottom) T/C at x.x °F has returned below limit, dev x.x °F from setpoint: Indicates that
specimen thermocouple has returned from below temperature limit.
(Top, Middle, or Bottom) Thermocouple is Open: The thermocouple is open.
(Top, Middle, or Bottom) Thermocouple Repaired: The thermocouple that was previously open has been
repaired.