ATS 2140-M Series, Instruction Manual

Page: 11 / 115

11
2.2 Warnings
The following statements are warning statements. Unlike caution statements, warning statements alert
the operator to conditions that may injure personnel. Operators must be aware of these conditions in
order to prevent injuries that may occur while operating this equipment.
WARNING: Disconnect power prior to performing maintenance. Turn off the unit and
disconnect and lock out before performing any maintenance procedures.
WARNING: Hot/Burn surface, use personal protective gear when operating equipment and
handling materials associated with the testing procedure.
WARNING: Pinch hazard.
WARNING: Do not open the panel.
WARNING: Unpack and operate on a stable surface.
2.3 Cautions
The following statements are caution statements. These statements alert the operator to conditions that
may damage equipment. Operators must be aware of these conditions in order to ensure safe operation
of this equipment.
CAUTION: Installation of electrical devices must be accomplished by competent personnel
and done in accordance with any current local and national codes. Equipment grounding is a
MUST for both safety and proper operation.
CAUTION: Before energizing the electrical power to the equipment, turn off all power
switches and place all controls in an OFF position. Check that the power source is surge-
protected and is of the appropriate voltage and amperage. Use appropriate power adapters
for the region.