SW5502C
Wireless Serial Server
User Manual
Link modes and
Applications
Click on the
“
COM1
”
link on the menu frame on the
left hand side of Web UI to go to COM 1 page as shown
in Figure 4
.
4
.
Note that if you would like to configure COM 2, please follow the same procedures
.
Figure 5.4
TCP Server Link Mode Settings under COM 1 Page
Select TCP Server radio button
in the Link Mode options
.
Note that
TCP Server is the default Link Mode for
COM port of SW550XC
.
Under the TCP Server
section, you will find the following options
.
1)
Application
:
There are 4 different communication applications
to choose from
here
:
RAW
:
There is no protocol on this mode which means
that the data is passed transparently
.
Virtual COM
:
The
Virtual COM protocol is enabled on the serial
device to communicate with a
virtualized port from a
remote client
.
It is possible to create a Virtual COM port on Windows
/
Linux
in order to communicate with the serial
device as a remote
client
.
Reverse Telnet
:
This application is used to connect the serial device and another serial device
