SW5502C
Wireless Serial Server
User Manual
Configuration and
setup
Figure 4.5
Mark of login device in the Caution column
If the device cannot be login, the system will notify you with the notification in
Figure 3
.
6
.
If this happens, the user
should try to check the reachability between your PC and the SW550XC with
‘
ping
’
command or utility
.
Figure 4.6
Notification of unsuccessful login when the interface is either down or unreachable
.
After a successful login, the SW550XC device can then be accessed and configured through the
Device
Management Utility
’
s interface
.
Another way of doing this is by selecting the SW550XC device and then choosing the
“
Config by browser
”
icon from
the forth icon on the icon bar or select
“
Config by browser
”
option from under the pull
-
down menu Configuration
.
Please see detail on how to configure the device via web browser in the next section
.
Sometime the SW550XC device might not be in the same subnet as your PC;
therefore, you will have to use our
utility to locate it in your virtual environment
.
To configure each device, click the selected SW550XC device
(
default
IP
:
10
.
0
.
50
.
100
)
in the list of Device Management©, and click
“
Configuration
Network
…” (
or Ctrl
+
N
)
menu on
Device Management©
as shown in Figure 4.7 or
click on the second icon called Network on the menu bar, and a
pop
-
up window will appear as shown in Figure 4.8
Figure 4.7
Pull
-
down Menu of Configuration and Network
