AT-OME-MS42
63
Configuration and Management Interfaces
The
System
page is divided into two sections:
Network
and
System
. The
Network
section allows configuration
of the IP settings of the AT-OME-MS42. The
System
section provides controls for resetting the AT-OME-MS42 to
factory-default settings and updating the firmware.
MAC Address
This field displays the MAC address of the AT-OME-MS42.
IP Mode
Click this toggle switch to set the AT-OME-MS42 to
DHCP
or
STATIC IP
mode. The default setting is
DHCP
mode.
Refer to
Changing the Network IP Mode (page 42)
for more information.
• IP
Enter the IP address of the AT-OME-MS42 in this field. This field will only be available when
IP Mode
is set to
STATIC IP
. The default static IP address of the AT-OME-MS42 is
192.168.1.254
.
• Netmask
Enter the subnet mask of the AT-OME-MS42 in this field. This field will only be available when
IP Mode
is set to
STATIC IP
.
• Gateway
Enter the gateway (router) IP address in this field. This field will only be available when
IP Mode
is set to
STATIC
IP
.
• Telnet Port
Enter the desired Telnet port (for Telnet sessions) in this field. The default port is 23. Refer to
for more information.
System Page
