AT-OME-MS42
44
Device Operation
1.
Login to the web server. Refer to
Introduction to the Web Server (page 51)
.
2. Click
System
in the menu bar.
3. Click the
Telnet Login Mode
toggle switch.
• Set this toggle switch to
ON
to prompt for user credentials.
• Set this toggle switch to
OFF
to bypass user credentials request.
4. Click
Save
to commit changes.
Telnet Login Mode
When a Telnet session is request, the AT-OME-MS42 provides the option to prompt for user credentials or bypass
authentication before the Telnet session begins. This credentials prompt option can enabled or disabled. When
prompting for user credentials, use the same login information required by the built-in web server.
