AT-OME-MS42
11
Panel Description
Rear
Panel
1 IP MODE
Press and release this button to set the IP mode
or display the current IP address on the display
connected to the
HDMI OUT
port. Refer to
for more information.
2 RESET
Press and release this button to reset the unit to
factory-default settings. Refer to
Factory-Default Settings (page 50)
information.
3 USB-C IN
Connect a USB-C cable between from this port to a
USB-C source.
4 USB HOST
Connect a USB cable from each of these ports to
USB host devices.
5 DP IN
Connect a DisplayPort cable from this port to a
DisplayPort source.
6 HDMI IN
Connect an HDMI cable from each of these ports to
HDMI sources.
7 USB HUB
Connect USB devices to these USB ports.
8 HDMI OUT
Connect an HDMI cable from this port to a display or
other sink device.
9 HDBaseT OUT
Connect a category cable from this port to a
compatible receiver unit. Recommended receivers
are the AT-OME-SR21 or AT-OME-EX-RX.
10 AUDIO OUT
Connect an audio output device to this port using the
included captive screw block. Refer to
11 LAN
Connect an Ethernet cable from this port to the Local
Area Network (LAN). The AT-OME-MS42 includes
a built-in web server, which can be used to manage
and configure the product.
12 DC 24V
Connect the included 24 V DC power supply from
this power receptacle to an available AC electrical
outlet.
DP
HDMI 3
HDMI 4
PWR
LINK
USB-C
HDBaseT OUT
AT-OME-MS42
OMEGA
TM
MULTI-FOMAT SWITCHER
IP MODE
DP
HDMI 3
HDMI 4
USB-C
HDMI OUT
HDMI IN
1
2
1
2
3
4
DP IN
USB-C IN
HDMI OUT
HDBaseT OUT
LAN
DC 24V
RESET
AUDIO OUT
USB HOST
RS-232
L
R
RX TX
+
+
USB
USB
USB HUB
3
2
5
6
8
9
11
13
4
1
7
10
12
