AT-OME-MS42
42
Device Operation
System Configuration
The AT-OME-MS42 provides easy access to system configuration through the built-in web server, and is the
recommended method to adjust network settings.
1.
Login to the web server. Refer to
Introduction to the Web Server (page 51)
.
2. Click
System
in the menu bar.
3.
Locate the MAC address field, as shown below. This is the hardware address of the AT-OME-MS42.
Getting the MAC Address
Changing the
Network IP Mode
MAC address
By default, the AT-OME-MS42 is set to DHCP mode. Once connected to a network, and if a DHCP server is found
(or available), the AT-OME-MS42 will be assigned an IP address on the network, and no further network configuration
is required. However, if the AT-OME-MS42 is unable to detect a DHCP server within 15 seconds, then the unit will
use a self-assigned IP address within the range of
169.254.xxx.xxx
. The instructions below will focus on setting the
AT-OME-MS42 to static IP mode.
IMPORTANT:
Before assigning a static IP address to the AT-OME-MS42, it is recommended to
consult with the network or system administrator and obtain a available IP address. If the AT-OME-
MS42 is assigned an IP address which is already in use by another device, it may cause either
network issues and/or the AT-OME-MS42 will be not accessible.
1.
Login to the web server. Refer to
Introduction to the Web Server (page 51)
.
2. Click
System
in the menu bar.
