AT-OME-MS42
59
Configuration and Management Interfaces
EDID Settings
Click these drop-down lists to select the desired EDID to be used for each input. The following EDID presets are
available. When selecting an EDID, make sure that the display/sink device is capable of supporting the resolution/
timing. If the sink device is not able to support a feature, then the source will not be displayed. Selecting the
Connected Display
EDID will provide the most compatible settings for most displays. In addition, three memory
locations are available for storing captured EDID data. If an EDID is stored in a memory location, it will also be added
to the list available EDID selections.
EDID Saved
The AT-OME-MS42 provides three memory locations used for storing captured EDID data. Click these drop-down
lists to select and store the external EDID.
EDID listing
Connected Display
1280x800 2CH
3840x2160 2CH - NO HDR Support
1024x768 2CH
1920x1200 2CH
Memory_1
1920x1080 2CH
Memory_2
1366x768 2CH
Memory_3
EDID Page
This page provides controls for selecting and storing EDID data. Refer to
for more
information.
