AT-OME-MS42
72
Solution Setup and Configuration Guide
7. Click the
IP Mode
drop-down list to select the login mode for the display device.
• If set to
Login
, then a username and password will be required to access the Telnet session.
• If set to
Non-Login
, then no credentials will be required for the Telnet session.
8. Locate the
TCP/IP Settings of Controlled Device
section and enter the following information:
a. IP Address
Enter the IP address of the device to be controlled.
b. Port
Enter the port in this field.
c. Username
This field is only required if
IP Mode
is set to
Login
. Enter the username in this field.
d. Password
This field is only required if
IP Mode
is set to
Login
. Enter the required password in this field.
