Atlona AT-UHD-PRO3-1616M, Manual

Page: 29 / 79

AT-UHD-PRO3-1616M 29
Basic Operation
Output Mirroring
In addition to the HDBaseT outputs, the AT-UHD-PRO3-1616M also provides four HDMI output ports (highlighted in
the image below).
AT-UHD-PRO3-1616M
FCN CANCEL EDID INFO
POWER ENTER 5 6 7 8
1 2 3 4
HDBaseT OUT
1ED 2ED 3ED 4ED 5ED 6ED 7ED 8ED 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18
19 20
HDMI OUT
AUDIO OUT
1
L R
2
L R
3
L R
4
L R
5
L R
6
L R
7
L R
8
L R
9
L R
10
L R
11
L R
12
L R
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
3 4 5 6 7 8
IR OUT IR IN
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
IR IN RS-232
MAIN
RX TX S
LAN FW
OFF
ON
PWR: 100-240VAC 50/60Hz
HDMI IN
9 10 11 12 13 14 15 16

HDMI Port Signal that is mirrored (default)
HDMI OUT 17 HDBaseT OUT 13
HDMI OUT 18 HDBaseT OUT 14
HDMI OUT 19 HDBaseT OUT 15
HDMI OUT 20 HDBaseT OUT 16
These four HDMI ports are used to mirror (copy) an HDBaseT output signal and duplicate it on any or all of these
ports. By default, mirroring is enabled on these ports. However, mirroring can be disabled. When mirroring is
disabled, any of the 16 HDMI inputs can be routed to these HDMI outputs, transforming this product into an 16 x 20
matrix switcher. The default mirror settings are listed below
HDBaseT OUT 9
HDMI
HDMI IN 7
HDMI IN 2
AT-UHD-PRO3-1616M
A/V Signal
AT-UHD-EX-100CE-RX
Source 1
Source 2
Display
HDMI OUT 17
Display
AT-UHD-PRO3-16
16M
FCN
CANCEL
EDID
INFO
POWER
ENTER


A/V Signal
Changing the Mirrored Port
Mirroring is enabled, by default. The diagram below, illustrates the signal flow of mirroring HDBaseT OUT 9 to HDMI
OUT 17 . The instructions on the following page provide the steps to reproduce this configuration. Two sources
have been connected to the matrix: one to HDMI IN 7 and the other to HDMI IN 2 . HDMI IN 7 will be used in this
example.