AT-UHD-PRO3-1616M
16
Installation
Using the web GUI
1.
Login to the web GUI. Refer to
Introduction to the Web GUI (page 57)
for more information.
2. Click
Network
, under the
Settings
section in the menu bar on the left side of the screen.
• Click
ON
, next to
DHCP
, to set the matrix to DHCP mode. If set to DHCP mode, the IP Address, Subnet,
and Gateway fields will automatically be assigned by the DHCP server (if one exists). If no DHCP server
can be found, the matrix will be assigned the static IP address of 192.168.0.150 with a subnet mask of
255.255.255.0.
• Click
OFF
to set the matrix to static IP mode. When set to static IP mode, enter the required information in
the
IP Address
,
Subnet
, and
Gateway
fields, as shown in the illustration below.
3. Click the
Save
button to commit changes.
