AT-UHD-PRO3-1616M
19
Basic Operation
1.
Make sure the power button on the rear panel is set to the
ON
position.
2.
Perfom one of the following operations:
a.
Power Off (standby mode)
Point the IR remote control at the front panel of the matrix and press the
Off
button. Note that when the
matrix is powered-off, it is placed in
b. Power On
Point the IR remote control at the front panel of the matrix and press the
On
button.
NOTE:
If the matrix does not power, check to make sure that the power cable, on the rear of the
unit, is connected to an active AC wall outlet. Also verify that the
ON/OFF
switch is in the
ON
position.
Using the IR Remote Control
AT-MRC
AT-UHD-PRO3-1616M
15 feet (max.)
AT-UHD-PRO3-88M
FCN
CANCEL
EDID
INFO
POWER
ENTER
AT-MRC
Power
On
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Off
Input
Volume
Output
