AT-UHD-PRO3-1616M
26
Basic Operation
AT-MRC
Power
On
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Off
Input
Volume
Output
Routing to Output Numbers Greater than 16
When entering inputs and outputs with a value greater than 16, the first and second digit of the input must be entered
separately, as shown below.
1.
Point the IR remote control at the front panel of the matrix.
2. Under the
Input
section on the IR remote control, press the button
of the desired input. In this example,
HDMI IN 15
will be selected
by pressing button
15
.
The front-panel display will show the
following:
iNPUT 15 ROUTED to
OUTPUT 19
Select input 15
3. Under the
Output
section on the IR remote control, press the button
of the first number of the desired output. In this case,
HDMI OUT
19
is selected by pressing button
1
then
9
. The front panel display
will indicate the following:
NOTE:
To route an input to
HDMI OUT 20
, press buttons
1
then
10
on the IR remote control.
IMPORTANT:
After the first digit of a two-digit output is specified, the AT-UHD-PRO3-1616M will
wait approximately 1 second for the second digit. If the second digit of the output is not specified
within this time interval, the second digit will not be processed and the AT-UHD-PRO3-1616M will
use the first digit as the routed output.
IMPORTANT:
Before routing an input to output 17 through 20, output mirroring must be disabled
through web interface. Refer to
for more information.
