Atlona AT-UHD-PRO3-1616M, Manual

Page: 20 / 79

AT-UHD-PRO3-1616M 20
AT-UHD-PRO3-1616M
FCN CANCEL EDID INFO
POWER ENTER 5 6 7 8
1 2 3 4
HDBaseT OUT
1ED 2ED 3ED 4ED 5ED 6ED 7ED 8ED 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18
19 20
HDMI OUT
AUDIO OUT
1
L R
2
L R
3
L R
4
L R
5
L R
6
L R
7
L R
8
L R
9
L R
10
L R
11
L R
12
L R
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8
IR OUT IR IN
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
IR IN RS-232
MAIN
RX TX S LAN FW
OFF
ON
PWR: 100-240VAC 50/60Hz
HDMI IN
9 10 11 12 13 14 15 16


AT-UHD-PRO3-1616M
FCN CANCEL EDID INFO
POWER ENTER 5 6 7 8
1 2 3 4
HDBaseT OUT
1ED 2ED 3ED 4ED 5ED 6ED 7ED 8ED 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18
19 20
HDMI OUT
AUDIO OUT
1
L R
2
L R
3
L R
4
L R
5
L R
6
L R
7
L R
8
L R
9
L R
10
L R
11
L R
12
L R
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
3 4 5 6 7 8
IR OUT IR IN
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
IR IN RS-232
MAIN
RX TX S
LAN FW
OFF
ON
PWR: 100-240VAC 50/60Hz
HDMI IN
9 10 11 12 13 14 15 16
Basic Operation
The POWER button on the front panel of the matrix, allows the matrix to be powered-on or placed in standby mode.
In standby mode, the web GUI is still accessible, even though the unit appears “powered off”.
1. Locate the POWER button on the front panel. When the matrix is in normal operating mode, the POWER button
will be backlit by a solid blue light. In this mode, operations using the front panel buttons, web GUI, or through
API commands can be performed.
2. Press the POWER button, on the front panel to place the matrix in standby mode.
3. Press the POWER button again, to power-on the matrix and return to normal operating mode.
The matrix will power-down and be placed in a low-power state and the POWER button will be backlit by a solid
red light.
When the matrix is in standby mode, operations using the front-panel buttons are suspended. However, access
to the matrix, through the web GUI or API commands is still available.
NOTE: Firmware version 16.1.00-2 supports a front-panel display time-out feature. If there is no
front-panel activity after 30 seconds, the front-panel display will turn off. The time-out feature only
hides the text in the front panel display. Initiating a routing command, for example, or other operation
will turn on (“wake up”) the front-panel display and the matrix will wait for the next command to be
entered.
Standby Mode