AT-UHD-PRO3-1616M
65
Route Memory page
The Web GUI
Memory Reset
Click this button to reset preset memory to factory-default settings. Note that performing this function will erase all
memory presets.
Output 1 - Output 20
Click the drop-down lists, to the right of the output name, to select the desired input for routing. Refer to
for more information.
Output 17
and
Output 20
are used for mirroring. Click the
Mirror Mode
drop-down list to enable or disable mirroring on the specified output. If
Mirror Mode
is enabled, then
only outputs will be available. If disabled, then inputs will be available.
Save
Click this button to commit all changes.
Cancel
Click to abort changes.
Memory Label
Click this drop-down list to select the desired memory location to be labeled. Enter the name of the memory location
in the field to the right of the drop-down list. Click
Change
to commit the label to the memory location. Refer to
Renaming Memory Presets (page 39)
for more information.
Memory Selection
Click this drop-down list to select the desired memory preset. Click
Select
to recall the memory preset. Refer to
Creating and Editing Routing Presets (page 33)
for more information.
