Atlas Xenotest 440 Operating Instructions Manual Download Page 53

Page: 53 / 64

- 53 -

Operating Manual Xenotest

440

Inhalt/Content/Sommaire

10.1 Inspection

The instrument must be inspected annually. The scope
of the inspection includes:

• Checking the protective components of the instru

ment

• Checking the functional capability of the program

control panel

NOTE – warranty!

The manufacturer warrants the safety and operation on
the condition that:

• Inspection intervals are maintained
• Inspections are carried out by appropriately trained

and qualified personnel or by an Atlas Technical Ser

vice Representative

• Instructions in the operating manual are observed

NOTE – service package!

Atlas offers a service package especially adapted to the
instrument which includes inspection, measuring and
calibration services.

10.2 Repair

Repair work may only be carried out by appropriately
trained and qualified personnel or by an Atlas Technical
Service Representative. Only original spare parts should

be used to install or change instrument components.
Atlas will not be responsible for instrument components
or parts from third-party manufacturers.

Maintenance

Summary of Contents for Xenotest 440

































































Search results

Summary of Contents for Xenotest 440

Reviews:

Brands by name

Popular brands

Atlas Xenotest 440, Operating Instructions Manual

Search results

Summary of Contents for Xenotest 440

Reviews:

Brands by name

Popular brands