manualshive.com logo in svg

Atlas Xenotest 440, Operating Instructions Manual

Share
Download
Atlas Xenotest 440 Operating Instructions Manual Download Page 5

- 5 -

Inhalt/Content/Sommaire

Operating Manual Xenotest

®

 440

Instructions for the user:

This operating manual describes the Xenotest

®

 440 lightfastness instrument. Please note that the instrument should 

only be operated by authorized and qualified personnel.

Qualified personnel are users who:

•   Have obtained knowledge of instrument operation through specialized training
•   Have been trained in the operation and function of the Xenotest 440 on the basis of this operating manual
•   On the basis of their professional activities, experience and training with regard to safety-related regulations, are 

capable of assessing and recognizing potential work hazards

Maintenance work:

•   The lamps may only be replaced by qualified personnel who have been instructed by an electrician or authorized 

Atlas representative

Cleaning work:

•   Cleaning of the instrument or parts thereof may only be performed by instructed personnel.

Read this operating manual carefully before using the Xenotest 440 for the first time. You will then 

be able to utilize all of the instrument features and avoid damage.

Should a particular problem occur which you feel is not adequately covered in this operating man-

ual, we urge you for your own safety to contact Atlas or your local sales/service representative.

1 

Safety Instructions

Summary of Contents for Xenotest 440

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands