Atlas Xenotest 440 Operating Instructions Manual Download Page 10

Page: 10 / 64

Operating Manual Xenotest

440

- 10 -

Inhalt/Content/Sommaire

Delivery of the instrument

2.1 Packing

The Xenotest

440 is delivered in a stable packing crate.

All packing materials can be separated and are recy-
clable.

• Packing pallet of wood
• Steel screws for screwing together the crate and the

crate lid

• Polyethylene foil (PE)
• Polyethylene foam (PE)

The following sensitive components are packed sepa-
rately:

•   Xenon lamps
•   Outer cylinder
•   Optical filters
•   XENOSENSIV

sensor

2.2

Scope of delivery

The Xenotest 440 is not ready for operation directly

upon delivery. The separately packed xenon lamps must
be installed before operating. The scope of delivery in-
cludes:

Basic instrument:

•   Radiation system with xenon lamps
•   Outer cylinder made of special UV glass
•   Turning mode gear
•   Air cooling system
•   Humidity system
•  Sample spraying system

Measuring system:

• Sensor for measuring the test chamber temperature

and test chamber humidity

• XENOSENSIV sensor for measuring the irradiance

and the surface temperature at sample level

• Adapter for using the XENOSENSIV sensor in the

test chamber

Technical documentation:

•   Operating manual
•   Software documentation
•   Spare parts list

NOTE – test equipment!

Sample holders and an optical filter system need to be
installed to perform weathering and light exposure tests.

Summary of Contents for Xenotest 440

































































Search results

Summary of Contents for Xenotest 440

Reviews:

Brands by name

Popular brands

Atlas Xenotest 440, Operating Instructions Manual

Search results

Summary of Contents for Xenotest 440

Reviews:

Brands by name

Popular brands