manualshive.com logo in svg

Atlas Xenotest 440, Operating Instructions Manual

Share
Download
Atlas Xenotest 440 Operating Instructions Manual Download Page 28

Operating Manual Xenotest

®

 440

- 28 -

Inhalt/Content/Sommaire

5.9 

Measuring and control sensors

Fig. 18

: 

A combined temperature and humidity sensor 

1

 is in-

stalled in the test chamber of the Xenotest

®

 440.

The test chamber temperature and relative humidity are 
measured and regulated with this sensor.

The functions of the sensor are:

•   Display of the measured test chamber temperature
•   Constant control of the test chamber temperature ac

-

cording to programmed setpoint

•   Display of the measured relative humidity in the test 

chamber

•   Constant  control  of  the  relative  humidity  in  the  test 

chamber according to programmed setpoint

A  XENOSENSIV

®

  RC  sensor  for  controlling  the  irradi

-

ance and surface temperature is positioned on the sam-
ple rack.

The functions of the XENOSENSIV RC sensor:

•   Measurement of the surface temperature at sample 

level

•   Measurement of the irradiance at sample level
•  Regulation of the surface temperature (BST or BPT) 

according to a programmed setpoint

•   Display of the measured irradiance
•   Constant control of the irradiance according to pro

-

grammed setpoint

 NOTE

The parameters mutually influence each other. A pre-
liminary test should be made to establish whether the 

desired  values  are  reached  (see  also  section  7.4  and 
section 7.5).

1

Fig. 18

5 

Functional description

Summary of Contents for Xenotest 440

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands