Atlas Xenotest 220 Operating Instructions Manual Download

Page: 55 / 64

- 55 -

Operating Manual Xenotest

220/220+

Maintenance

10.1 Inspection

The instrument must be inspected annually. The scope
of the inspection includes:

• Checking the protective components of the instrument
• Checking the functional capability of the program control

panel

NOTE – warranty!

The manufacturer warrants the safety and correct opera-
tion on the condition that:

• Inspection intervals are maintained
• Inspections are carried out by appropriately trained and

qualified personnel or by an Atlas Technical Service
Representative

• Instructions in the operating manual are observed

NOTE – service package!

Atlas offers a service package especially adapted to the
instrument which includes inspection, measuring service
and calibration services.

10.2 Repair

Repair work may only be carried out by appropriately
trained and qualified personnel or by an Atlas Technical
Service Representative. Only original spare parts should

be used to install or change instrument components. Atlas
will not be responsible for instrument components or parts
from third-party manufacturers.

NOTE – service documents

A complete spare parts list and other repair documents are

available for qualified technical personnel upon request.

Summary of Contents for Xenotest 220

































































Search results

Summary of Contents for Xenotest 220

Reviews:

Related manuals for Xenotest 220

Brands by name

Popular brands

Atlas Xenotest 220, Operating Instructions Manual

Search results

Summary of Contents for Xenotest 220

Reviews:

Related manuals for Xenotest 220

Brands by name

Popular brands