Atlas Xenotest 220 Operating Instructions Manual Download

Page: 29 / 64

- 29 -

Operating Manual Xenotest

220/220+

Functional description

5.8 Measuring and control sensors

Fig. 20

: A combined test chamber temperature and hu-

midity sensor

is built into the Xenotest 220/220+ test

chamber. The test chamber temperature and the relative
humidity can be set and controlled by this sensor.

The functions of the sensor are:

• Display of the measured test chamber temperature
• Constant control of the test chamber temperature ac

cording to programmed setpoint

• Display of the measured relative humidity in the test

chamber

• Constant control of the relative humidity in the test

chamber according to programmed setpoint

A XENOSENSIV sensor for controlling the irradiance and

surface temperature is positioned on the sample rack.

The functions of the XENOSENSIV sensor:

• Measurement of the surface temperature at sample

level

• Measurement of the irradiance at sample level
• Constant control of the BST according to

programmed

setpoint

• Display of the measured irradiance
• Constant control of the irradiance according to

pro-

grammed setpoint

NOTE

CHT and BST are controlled simultaneously.

Fig. 20

Summary of Contents for Xenotest 220

































































Search results

Summary of Contents for Xenotest 220

Reviews:

Related manuals for Xenotest 220

Brands by name

Popular brands

Atlas Xenotest 220, Operating Instructions Manual

Search results

Summary of Contents for Xenotest 220

Reviews:

Related manuals for Xenotest 220

Brands by name

Popular brands