- 41 -
Operating Manual Xenotest
®
220/220+
6
Start up
6.9 Interfaces
Fig. 33:
The Xenotest 220 instrument is equipped with an RS232
interface
1
for exchanging data with external systems.
The serial interface (RS232) enables measured data to
be output during an ongoing test program on a computer.
Fig. 34:
The Xenotest 220+ instrument is equipped with four inter
-
faces for exchanging data with external systems.
Network connection
1
:
The test instrument can be integrated into a network with
the “Integrated Fast Ethernet Controller” protocol (3C905C-
TX-compatible).
Serial interface
2
:
The RS232 interface enables measured data to be output
during an ongoing test program on a computer.
USB interface
3
:
Data interface according to the USB 2 standard. Meas
-
ured data can be output to a computer via this interface
during an ongoing test program. Only available with later
versions of the software.
Slot
4
for memory card
5
:
For updating installed instrument software, loading new
test programs or downloading measuring and test data.
The
light emitting diode (LED)
6
illuminates when
data is transferred to the memory card.
NOTE – data loss
The memory card should not be removed from the slot
when the LED is illuminated.
1
1
2
3
4
6
5
Fig. 33
Fig. 34
