7
NOTE: Use the chair box, or another heavy object, like a toolbox,
at the bottom of the rail to prevent it from sliding down the stairs.
3. Install two (2) splice bars into the end of the track
containing the splice pins. They will each be secured
by the "joint fasteners" (5/16" flathead screws).
4. Position the two ends of the rail
close together. Locate and connect
the plug on the ends of the two
power harnesses inside the two
rail pieces.
See Figure 4-5.
5. With the plastic rack facing up,
slide the top into the bottom rail
and guide them together using
the pre-installed pins. Gently tap
on the top rail if necessary to
get them close together.
Be careful not to pinch the
power harness.
See Figure 4-6.
6. Install two (2) joint fasteners and firmly tighten with
3/16" Allen wrench.
See Figure 4-7.
7. Turn rail over and install the remaining two (2) joint
fasteners and firmly tighten with 3/16" Allen wrench.
See Figure 4-8.
RAVE 2 INSTALLATION MANUAL INSTALLATION
