14
7. Position the keyed seat swivel post in the seat base
hole closest to the top of the stairs. Securely tighten the
two (2) bolts on the sides of the post housing using a
5/32" Allen wrench.
See Figure 4-27.
9. Position the seat directly aligned over the chassis and
place onto the seat swivel post. Press the swivel lever
until the seat is fully engaged with the swivel post.
Check the swivel lever to test the locking mechanism.
The system will not function if proper engagement is
not achieved.
See Figure 4-28
.
10. Connect the seat cable to the 8-pin connector on the
chassis that is opposite the foot plate and closest to
the wall.
See Figure 4-29.
6. Connect the footrest cable to the 6-pin connector on
the chassis.
See Figure 4-26.
8. Use the supplied white plastic plugs to secure the
vertical footrest shroud to the main footrest cover plate.
RAVE 2 INSTALLATION MANUAL INSTALLATION
