General instructions
Step
Action
1
Ensure that the supply voltage matches the voltage on the data plate.
2
Install an isolating switch near the compressor.
For Full-Feature compressors: fit an isolating switch near the dryer.
3
Fit fuses in the incoming wiring. Check the condition of all incoming wiring and make
connections. See
Electrical diagrams.
3.4
Pictographs
Ref.
Description
1
Warning: possible air/fluid discharge
2
Warning: voltage
3
Warning: air must not be inhaled
4
Warning: wear ear protectors
5
Warning: machine may start automatically
6
Warning: pressure
7
Warning: hot parts
8
Warning: moving parts
9
Warning: rotating fan
10
Drain the condensate daily and inspect the vessel yearly. Note down the inspection dates.
11
Read the instruction manual
Instruction book
38
2920 7105 31
Summary of Contents for GX 2 EP
