25
| Remote Vacuum Sensor Manual | v1.0
Innovation In and Out of Parlour
©
A
TL
A
g
ricu
ltu
ra
l
Te
ch
n
olog
y
L
imite
d:
Ju
n
e
2
0
1
6
Milking Mode
Press the Milk key
to put the system into Milk mode before milking.
The display will show ‘Milk’ and the vacuum level.
If the Remote Vacuum Sensor is connected to other ATL equipment (ie. AirBlast, Milk Pump Control, Pulse-8
Pulsation Control or Milk Meter System), these can be linked together so that when the milk key is
pressed, they all go into milking mode.
Press the Milk key
to access information on the Milking program. See separate section.
Press the Idle key
to finish milking and return to Idle mode.
Washing Mode
Press the Wash key
to put the system into Wash mode to allow washing.
The display will show ‘Wash’ and the vacuum level.
If the Remote Vacuum Sensor is connected to other ATL equipment (ie. AirBlast, Milk Pump Control, Pulse-8
Pulsation Control or Milk Meter System), these can be linked together so that when the wash key is
pressed, they all go into washing mode.
Press the Wash key
to access information on the washing program. See separate section.
Press the Idle key
to finish washing and return to Idle mode.
Milk
Mode
Vacuum Level
Milk
-46.0
kPa
+
Milk
Mode
Vacuum Level
Wash
-46.0
kPa
+
