26
| Remote Vacuum Sensor Manual | v1.0
Innovation In and Out of Parlour
©
A
TL
A
g
ricu
ltu
ra
l
Te
ch
n
olog
y
L
imite
d:
Ju
n
e
2
0
1
6
Info Function
The info function provides information on milking and washing times and vacuum levels. The information is
available all of the time (i.e. both when milking and washing programs are running or when the control is in
idle). To access the information, the user must press the key the which corresponds to the current mode, for
example if the system is milking, press the milking key again.
Press the Idle key
to access the info function when the system is Idle.
Press the Milk key
to access the info function when the system is Milking.
Press the Wash key
to access the info function when the system is Washing.
The display will now show the Washing Vacuum lowest level during the washing cycle .
Information menu continued on next page
+
+
ê
ê
ê
Washing Vacuum Low: This is the lowest level after 1
minute of operation that the unit measured during the
wash.
Washing Vacuum
Low: 43.2kPa
Washing Vacuum High: This is the highest level after 1
minute of operation that the unit measured during the
wash.
Washing Vacuum
High: 48.5kPa
Last Washing Time: This is the length of the wash, if the
unit is still washing, this will display the current washing
time.
Last Washing
Time: 000:00:00
