15
| Remote Vacuum Sensor Manual | v1.0
Innovation In and Out of Parlour
©
A
TL
A
g
ricu
ltu
ra
l
Te
ch
n
olog
y
L
imite
d:
Ju
n
e
2
0
1
6
Setting up the Remote Vacuum Sensor
Before it can be used, the Remote Vacuum Sensor must be setup. This is outlined in the following pages.
The Keypad
There are 3 keys on the keypad, allowing the user to put the system into milk, wash and back to idle.
The keypad is constructed from a tough membrane overlaying individual key switches. This is a proven,
reliable construction which will last for many years provided it is cleaned only with warm soapy water and
not hosed down at high pressure.
The Display
The display is an OLED dot matrix type display, allowing for large and small characters to be displayed.
During milking and washing, the vacuum level is displayed in kPa in a large font.
The Remote Vacuum Sensor Control is very energy efficient; power saving was an important element of the
design criteria, the display will dim after 5 minutes to conserve energy.
+
Vacuum Sensor
Idle Key
Milk Key
Wash Key
