QSG_F670_363.00_EN_01_2021-02-09
35/42
SELECTING A PROGRAM OR A SEQUENCE
If necessary, you can select another program.
1. Press
up/down
.
STARTING AND STOPPING CURRENT CYCLE
Use the front panel keys to start/stop a measurement cycle.
With the desired program displayed on the
Program
screen:
STARTING A MEASUREMENT CYCLE
1. Press
Start
.
The cycle phases of the program are successively
displayed:
FILL
STABILIZATION
TEST
DUMP
At the end of the cycle, the results are displayed and
READY
appears at the bottom right of the screen.
During the measurement cycle, you may press
to
access the
MAIN MENU
screen and set parameters for
a next measurement cycle.
STOPPING A CYCLE
2. Press
Reset
to immediately stop the current
measurement cycle and return to the
Program
screen.
