QSG_F670_363.00_EN_01_2021-02-09
34/42
CONFIGURING THE ASSOCIATED MEASUREMENTS
3.
Select the program to configure and press
.
The parameters of the selected measurement
type are displayed.
4. Define the measurement cycle parameters.
See: Modifying a parameter.
MODIFYING A PARAMETER
Use this procedure to complete the test program setup.
The protection of the parameters is configurable. If the icon
is displayed at the bottom
of the screen, you must insert the USB unlocking device or enter a password before
modifying a parameter.
On the
PARAMETERS
screen of the program (see: Preparing a program):
1. Press
up/down
to select the parameter to
modify, and then press
.
An arrow
is displayed on the right of the parameter
being modified.
2. Use the
up/down
keys to modify the
parameter value, and press
to validate.
The arrow
returns to the left of the modified
parameter.
3.
Repeat these steps until all parameters are set.
4.
To return to the
MAIN MENU
screen, press
Esc
as many times as necessary.
