AT&T SB67118 DECT 6.0 User Manual Download Page 35

Page: 35 / 109

Select announcement

Use this feature to select an announcement for your
independent mailbox from the list of announcements.

When the telephone is idle, press

ANSWER ON

for the

desired line.

Press or to scroll to

Setup.

Press

MENU/

ENTER

twice to select

Mailbox setup

Press or to scroll to

Select anncemnt

. Press

MENU/

ENTER

Press or to scroll to an announcement.

Press

MENU/

ENTER

to save the setting and return to the

previous menu. The selected announcement plays. To exit
without making changes, press

EXIT

Number of rings
Select anncemnt

Select anncemnt
:Prerecord

ENTER=Save

Select anncemnt
:Anncemnt 1

ENTER=Save

NOTE:

The auto attendant and the mailbox share the same list of announcements.

Getting started

Mailbox setup (for answering system)

Mailbox setup
Auto attendant
Announcement
Record ext list

Summary of Contents for SB67118 DECT 6.0














































































































Search results

Summary of Contents for SB67118 DECT 6.0

Reviews:

Related manuals for SB67118 DECT 6.0

Brands by name

Popular brands

AT&T SB67118 DECT 6.0, User Manual

Search results

Summary of Contents for SB67118 DECT 6.0

Reviews:

Related manuals for SB67118 DECT 6.0

Brands by name

Popular brands