AT&T SB67118 DECT 6.0 User Manual Download Page 59

Page: 59 / 109

Answer a PTT call

1. When you hear two beeps, the screen displays

PTT from: X:Handset X

(

represents the extension number [

Handset X

represents the default

handset name).

2. Press

INT

to convert the call into a normal intercom call with that extension.

-OR-

Respond with a new PTT call. Wait for the end of the three-second PTT wait

state (the screen changes to idle mode) then, to respond with the telephone
base, see

PTT to a single handset

PTT to all handsets

on the previous

page. To respond with a handset, see

Answer a PTT call

in the SB67108

handset manual.

NOTE:

If the PTT call is sent to all handsets, the intercom call is established with the first one

who presses

INT

Convert PTT call to intercom call

You can convert the PTT call to a two-way intercom call on the called
telephone base.

1. Press

INT

on the called extension to convert the call to a two-way

intercom call.

2. Optionally, put the corded handset on the telephone base or press

SPEAKER

to end the intercom.

End a PTT call

Press

EXIT

to end the incoming PTT call.

•

Telephone base operation

Push to talk (PTT) intercom

Summary of Contents for SB67118 DECT 6.0














































































































Search results

Summary of Contents for SB67118 DECT 6.0

Reviews:

Related manuals for SB67118 DECT 6.0

Brands by name

Popular brands

AT&T SB67118 DECT 6.0, User Manual

Search results

Summary of Contents for SB67118 DECT 6.0

Reviews:

Related manuals for SB67118 DECT 6.0

Brands by name

Popular brands