AT&T SB67118 DECT 6.0 User Manual Download Page 79

Page: 79 / 109

3. Press

MENU/

ENTER

to select

Play all

to listen to all

messages. Press

REP

to repeat the message, press

REP

twice to listen to the previous message. Press

SKIP

to move forward to the next message. There is a

long beep after each message playback as a separator.

4. Playback ends after playing all the messages, and then

returns to the previous menu.

5. Press

Messages

again to end the message playback at any time.

To listen to messages in the handset mailbox:

When the telephone is idle, press

Messages

on the telephone base.

Press the one-touch

EXT 1-0

key for the destination extension mailbox.

Use the dial pad to enter the four-digit remote access
code of the extension. Use

REMOVE

to backspace and

delete a digit.

Go to steps 2-5 in the

To listen to messages in the general mailbox

section on the previous page.

Options during playback

When a message is playing, you can adjust the playback volume, skip, repeat,
or delete the message.

When messages are playing on the telephone base:

Press

VOL+

VOL-

to adjust the message playback volume.

Press

SKIP

to skip to the next message.

Press

REP

to repeat the message. Press twice to hear the previous message.

Press

REMOVE

to delete the message. The system announces “

Message deleted.

”

Press

Messages

to stop the playback.

Delete all old messages

Use this feature to only delete old (reviewed) messages. You cannot delete
new messages until you review them. You cannot retrieve deleted messages.

Delete all old messages in the general mailbox:

1. When the telephone is idle, press

Messages

on the

telephone base.

2. Press or to scroll to

Delete all old.

Press

MENU/

ENTER.

•
•
•
•
•

12:57 PM 03/06
<= Message 1 =>

2 New messages
  Play all
  Deliver
  Delete all old

Answering system

Answering system operation

1 New messages
  Play all
  Deliver
  Handset anncemnt

2 New messages
  Play all
  Deliver
  Delete all old

Summary of Contents for SB67118 DECT 6.0














































































































Search results

Summary of Contents for SB67118 DECT 6.0

Reviews:

Related manuals for SB67118 DECT 6.0

Brands by name

Popular brands

AT&T SB67118 DECT 6.0, User Manual

Search results

Summary of Contents for SB67118 DECT 6.0

Reviews:

Related manuals for SB67118 DECT 6.0

Brands by name

Popular brands